MVF / MVP - Erection Manual
MVF/MVP M echanically S eamed V ertical Leg F lat M echanically S eamed V ertical Leg P encil-rib
®
ERECTION SEQUENCE
STEP 14
6
3
5
2
4
1
DOUBLE BEAD TAPE MASTIC
1/4"-14 X 7/8" WT
ROOF CAP
RIDGE FLASHING Install the roof cap starting and ending flush with the outside of the gable trim. Fasten the ridge flashing to the outside/ridge closures with 1/4"-14 x 7/8" WT fasteners. Temporarily leave 4'-0" unfastened on each end to allow for the rake trim to be installed later.
*
DO NOT FASTEN THROUGH THE LOCK OF THE STANDING SEAM.
* Roof Cap to be flush with the outside face of the gable trim. Refer to Section and Detail pages in the Erection Drawings. ROOF CAP
2"
2"
2"
2"
6"
2 = SPACES AT 6"
1/4"-14 X 7/8" WT
OUTSIDE/RIDGE CLOSURE
1/4"-14 X 7/8" WT
1"
Apply a bead of Sikalastomer-511, as shown, and install (14)1/4"-14 x 7/8" WT fasteners at roof cap laps. Use a 2" lap dimension.
DOUBLE BEAD TAPE MASTIC
ROOF CAP
1"
1 1/2"
Refer to erection drawing General Details for expansion joint installation instructions if required .
SIKA-511
2"
Version 2.0
SUBJECT TO CHANGE WITHOUT NOTICE
MVF/MVP-39
Made with FlippingBook - Online catalogs