MVF MVP Roof Panel

MVF-MVP Eave Isometric w Gutter

MVF/MVP ROOF PANEL

(20) 1/8" X 3/8" BLIND RIVETS

GABLE TRIM (GTV)

GABLE TRIM (GTV)

GUTTER STRAP (GSM) (FASTENERS NOT SHOWN)

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.)

GABLE TRIM PLUG (TPLV/TPRV)

(12) 1/8" X 3/8" BLIND RIVETS

EAVE GUTTER (EGM)

GABLE CORNER TRIM (GCTV)

GABLE EXPANSION TRIM (GET)

Note: 1. USE 1 1/2" LAP AT SPLICES, AND FIELD CUT 3/8" LOCKFORM AT SPLICE. 2. FASTEN SPLICE WITH (12) 1/8" X 3/8" BLIND RIVETS. 3. USE 511 SEALANT AT SPLICE.

NOTE: 1. START GABLE TRIM 3" OUT FROM END OF ROOF PANEL. 2. START EAVE GUTTER 3" OUT FROM ENDWALL BUILDING LINE. 3. LOCATE GABLE TRIM PLUG AGAINST HIGH-RIB OF CS ENDWALL PANEL OR FLAT OF AP ENDWALL PANEL. 4. USE 511 SEALANT AT PLUG AND CORNER TRIM TO GUTTER.

GABLE TRIM SPLICE

GABLE CORNER TRIM WITH GUTTER