MVF MVP Roof Panel

MVF-MVP Eave Isometric w Eave Trim

(22) 1/8" X 3/8" BLIND RIVETS

MVF/MVP ROOF PANEL

(4) 1/8" X 3/8" BLIND RIVETS

GABLE TRIM (GTVC)

GABLE TRIM (GTVC)

EAVE TRIM (ETM)

GABLE TRIM PLUG (TPLVC/TPRVC)

(13) 1/8" X 3/8" BLIND RIVETS

GABLE CORNER TRIM (GCTVC) FILL HOLE W/ 1/8" X 3/8" BLIND RIVET (BOTH LEGS)

GABLE TRIM SUPPORT (GTS) (10'-0" C.C.)

NOTE: 1. Start gable trim bottom leg 4" out from sidewall building line. Notch gable trim to avoid corner box rivets. 2. Start eave trim 3" out from endwall building line. 3. Locate Gable Trim Plug as close to building line as possible. Field notch as required. 4. Field cut roof panel at gable corner trim. (as required) 5. Use SIKA-511 sealant at plug and gable corner trim to eave trim. GABLE CORNER TRIM WITH EAVE TRIM

GABLE EXPANSION TRIM (GET)

NOTE: 1. Use 2" lap at splices, and field cut 3/8" lockform at splice. 2. Fasten splice with (13) 1/8" x 3/8" blind rivets. 3. Use SIKA-511 sealant at splice.

GABLE TRIM SPLICE