STC MSC Roof Panel

STC-MSC High Side Height Change w Cee Girt

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) INSIDE CLOSURE HEIGHT CHANGE GIRT WALL PANEL

BL

TRI-BEAD TAPE MASTIC *1/4-14 X 7/8" WT HEIGHT CHANGE TRIM (LHET)

**TRI-BEAD TAPE MASTIC OUTSIDE CLOSURE 1/4-14 X 1 1/4" WT (9 PER PANEL) PANEL CLIP W/ FASTENERS (SEE ROOF PANEL PLAN)

1

4 "

PRE-TAPED THERMAL SPACER (NOT BY CHIEF) ***

STC/MSC ROOF PANEL

Provide air gap of 1/4" min. at bottom of panel to avoid corrosion.

PURLIN BACK-UP PLATE

DRAFTING NOTE: *** Thermal spacer to be used with no insulation. ** 24" STC - Pre-Cut Tri-Bead Tape Mastic. 24" MSC - Tri-Bead Tape Mastic from roll. 18" MSC/STC - Tri-Bead Tape Mastic from roll. * For screw spacing refer to High Side Height Change detail in the MSC/STC Roof Panel Erection Manual.

4"

8"