Special Features

Eave Strut to Bypass Col w 10 Flange Joist and STC-MSC Roof Trans Exp w T-Spcr

*** NOTCH AND FIELD BEND TAB ON RAKE ANGLE, FASTEN TO EAVE STRUT LIP AS SHOWN NOTE: CONNECTION OF XBC-97 TO SLIDING EAVE STRUT IS NOT SHOWN IN THIS SECTION

** MAINTAIN 3 1/2" BETWEEN FIXED AND SLIDING EAVE STRUT DURING BUILDING ERECTION SPECIAL PUNCH 9/16" HOLES AT 1 3/8" DIM A AND 4 1/4" GAGE IN BOTH EAVE STRUTS

* FINGER TIGHTEN 1ST 1/2" DIA. NUT TO HARD WASHER, WRENCH TIGHTEN SECOND NUT TO FIRST NUT TO CREATE A SLIDING CONNECTION

(2) #12-14 X 1 1/4" FIXED EAVE STRUT TOP OF PURLIN LINE

1

1

(2) #12-14 X 1 1/4" (TYP.) (WALL COLOR) RAKE ANGLE (A-20-B)

4 1 2 " 1 1 4 "

CL

1"

REF PT

BL

(4) 1/2" X 1 1/4" BOLTS

1 1 4 "

ROOF JOISTS *** SPECIAL RAKE ANGLE (PL- )

1 3 8 " 4 1 4 "

(4) 1/2" X 1 1/4" BOLTS

EAVE HEIGHT

EAVE HEIGHT

(4) 5/8" X 1 1/2" BOLTS w/ 5/8" HARD WASHER ON C-SECTION SIDE FRAME COLUMN

SLIDING EAVE STRUT XBC-97 * (2) 1/2" X 1 3/4" BOLTS w (2) NUTS AND (1) 1/2" HARD WASHER AT EACH SLOT (BOLT MUST BE CENTERED IN SLOT)

FIXED EAVE STRUT

**3 1 2 "

3 1 4 "

XBC-97

(4) 5/8" X 1 1/2" BOLTS w/ 5/8" HARD WASHERS AT C-SECTION SIDE

SEE ROOF JOIST GENERAL DETAIL PAGE FOR SPECIAL RAKE ANGLE ATTACHMENT TO JOIST AND JOIST BOLTING TO FRAME COLUMN OR RAFTER

FRAME COLUMN

SECTION