Special Features

Parapet at Endwall w STC-MSC Gable Lead End w Thermal Spacer

* NOTE: REFER TO ISOMETRIC PARAPET FACADE CAP TRIM SPLICE DETAIL FOR INSTALLATION

** FIELD CUT BOTTOM OF BACK-UP PANELS TO MATCH ROOF SLOPE. PROVIDE AIR GAP OF 1/4" MIN. AT BOTTOM OF PANEL TO AVOID CORROSION. .

PARAPET CAP TRIM (PCT-X) 1/4-14 X 7/8" WT (12" C.C.) OUTSIDE CLOSURE

PARAPET GIRT

BL

#12-14 X 1 1/4" (24" C.C.) * PARAPET CLEAT (PCC-X)

**BACK-UP PANEL

HEIGHT CHANGE TRIM TOP (GHMTF) INSIDE CLOSURE w/ TAPE MASTIC TOP & BOTTOM

XXX'-X"

#12 - 14 X 1" PANCAKE HEAD (12"C.C)

SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING) (SEE INSERT DETAIL) TRI-BEAD TAPE SEALER

OUTSIDE CLOSURE

PARAPET/WALL PANEL #12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

STC/MSC ROOF PANEL 1/4-14 X 1 1/2" WT (12" C.C.)

HEIGHT CHANGE ANGLE (A-20-H) 1/4-14 X 1 1/4" WT (6" C.C.) (TYP) RAKE SUPPORT (A-20-T)

THERMAL SPACER

(NOT BY CHIEF)

TAPE MASTIC SENT FOR BACK-UP PANEL SIDE LAPS. WARRANTY FASTENERS SENT FOR BACK-UP PANEL.

1

4 "

1 4 "

HEIGHT CHANGE TRIM BOTTOM (GHMBF)

PURLIN

2"

SIKA 511 CAULK IN LOCKFORM OF HEIGHT CHANGE TRIM TOP (BEFORE ASSEMBLING)

*** 1/4-14 X 1 1/4" SHOULDER (24" C.C.) #12-14 X 1" PANCAKE HEAD (2 EACH PURLIN)

*** IT IS IMPORTANT THAT FASTENERS ARE INSTALLED THROUGH THE CENTER OF THE SLOTTED HOLES OF THE RAKE SUPPORT.