Eave and Gable Extensions

LS Eave Ext Only - Horiz FSP Soffit Bypass Gable and Standing Seam Roof Panel High Pitch

REFER TO GABLE SECTIONS FOR ROOF PANEL AND GABLE TRIM ATTACHMENTS AT THE BUILDING GABLE.

Provide air gap of 1/4" min. at bottom of panel to avoid corrosion.

CUT THIS SECTION AT END OF EXTENSION

STC/MSC ROOF: (2) #12-14 X 1" PANCAKE HEAD AT PURLINS MVF/MVP ROOF: (2) #12-14 X 1 1/4" AT PURLINS (WALL COLOR )

#12-14 x 1 1/4" (TYP) (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) GABLE EXTENSION CHANNEL (GEC ) INSIDE CLOSURE *

GABLE EXTENSION CHANNEL (GEC ) XLGA-1 CLIP

1

1

BL

(2) #12-14 X 1" PANCAKE HEAD

BL

INTERMEDIATE PURLIN

EAVE EXTENSION PURLIN (FIELD NOTCH FOR SPECIAL CHANNEL) (2) #12-14 X 1 1/4" (WALL COLOR) #12-14 X 1" PANCAKE HEAD (24" C.C.)

EAVE EXTENSION END PANEL #12-14 X 1" PANCAKE HEAD (24" C.C.)

SOFFIT PURLIN

SOFFIT RAKE ANGLE (A-20-H)

INSIDE CLOSURE

**

XXX' - X"

1

4 "

EAVE EXTENSION BEAM

EAVE EXTENSION BEAM

SOFFIT TRIM (VPST)

GIRT ANGLE (XGA- )

1/8" X 3/8" BLIND RIVET (12" C.C.) PANEL SUPPORT (SSSP) * DRAFTING NOTE: INSIDE CLOSURE MUST BE PROVIDED ON BUILDINGS WITH LINER INSULATION SYSTEM. **DRAFTING: INSIDE CLOSURE NOT REQ'D IF WALLS ARE "CS INSULATED"

XBC-33 (4) 1/2" X 1 1/4" BOLTS

#12-14 X 1 1/4"

#12-14 X 1" PANCAKE HEAD

SOFFIT RAKE ANGLE (A-20) #12-14 X 1" PANCAKE HEAD

FSP SOFFIT PANEL #12-14 X 1" PANCAKE HEAD (12" C.C) (TYP.)