Eave and Gable Extensions

STC-MSC Low Side Eave Ext w Eave Trim and FSP Soffit and Thermal Spacer

PRE-GLUED THERMAL SPACER FOR EAVE EXTENSION PANEL CLIP W/ FASTENERS (SEE ROOF PANEL PLAN)

BL

METAL INSIDE CLOSURE TRI-BEAD TAPE MASTIC (TOP AND BOTTOM) 2" STRIP OF TRI-BEAD TAPE MASTIC BETWEEN PANELS 1/4-14 X 1 1/4" WT (8 PER PANEL)

(NOT BY CHIEF)

5 1

2 "

#12-14 X 1" PANCAKE HEAD (12" C.C.) 1/4-14 X 7/8" (12" C.C.) (SOFFIT COLOR)

* TRAPEZOID PLUG (TRP) AT EACH HIGH RIB

1/4-14 X 7/8" WT (5 PER PANEL)

STC/MSC ROOF PANEL 1/4-14 X 1 1/4" WT (6 PER PANEL)

DOUBLE BEAD TAPE MASTIC (TOP AND BOTTOM)

INTERMED. PURLIN ***

#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL)

EAVE TRIM (ETM)

EXTENSION FLASHING (EF) #12-14 X 1 1/4" (12" C.C.) (TRIM COLOR)

INSIDE CLOSURE **

FSP SOFFIT PANEL 1/4-14 X 1" (2 PER CLOSURE)

1/4-14 X 7/8" (12" C.C.) (SOFFIT COLOR) OUTSIDE CLOSURE

1/4-14 X 7/8" (12" C.C.) #12-14 X 1" PANCAKE HEAD (12" C.C.)

****

1/8" X 3/8" BLIND RIVET (12" C.C.) 1/4-14 X 7/8" (EACH RIB) (SOFFIT COLOR)

SOFFIT TRIM (SBLTO) 1/8" X 3/8" BLIND RIVET (12" C.C.) #12-14 X 1" PANCAKE HEAD (12" C.C.)

DRAFTING NOTES: **

Inside closure must be provided on buildings with liner insulation system. *** If intermediate purlin is required, chg purlin, t-spacer and all fasteners to "dim" layer. **** 26 GA FSP soffit must always have 1/4-14 x 7/8" fasteners located at ribs at end supports. change fasteners to "dim" layer.

* See isometric Trapezoid Plug Installation detail for installation instructions.

WALL PANEL