Eave and Gable Extensions
MVF-MVP Gable Ext Lead End w NO Soffit and Thermal Spacer
PURLIN
* NOTE: This fastener must not hit the purlin.
PURLIN CLOSURE AT RIDGE IS TO BE FIELD CUT AND FASTENED TOGETHER WITH (2) 1/8" X 3/8" BLIND RIVETS.
PURLIN CLOSURE (GPC2 OR GPC3) (TYP) (2) PURLIN CLOSURE CLIPS (GCC1) AT EACH PURLIN CLOSURE (2) #12-14 X 1 1/4" EACH CLIP (2) 1/8" X 3/8" BLIND RIVETS (EACH CLIP)
CLOSURE CLIPS (GCC-1) (TYP.)
GABLE EXTENSION DIMENSION
PURLIN CLOSURE (TYP.)
BL
GABLE EXPANSION TRIM (GET) GABLE TRIM SUPPORT (GTS) (10'-0" C.C.) #12-14 X 1 1/4" (12" C.C.) (TRIM COLOR) (2) 1/4-14 X 7/8" (2) #12-14 X 1 1/4" (WALL COLOR) PANEL CLIP GABLE TRIM (GTVC)
(2) #12-14 X 1 1/4" (EACH CLIP) WALL COLOR
PANEL CLIP w/FASTENERS (SEE ROOF PANEL PLAN)
DOUBLE BEAD TAPE MASTIC * 1/4-14 X 7/8" WT (6" C.C.) #12-14 X 1 1/4" (2 EACH PURLIN) (WALL COLOR) PRE-GLUED THERMAL SPACER FOR GABLE EXTENSION
PURLIN
THERMAL SPACER (NOT BY CHIEF)
(2) 1/8" X 3/8" BLIND RIVETS (TYP.)
PURLIN CLOSURE (GPC) MVF/MVP ROOF PANEL
(2) #12-14 X 1 1/4"' PER CLOSURE
(NOT BY CHIEF)
(2) #12-14 X 1 1/4" TO CONNECT EACH CLIP TO EACH PURLIN PURLIN CLOSURE CLIP (GCC-1) (FIELD MODIFY CLIP AS REQUIRED) (2) #12-14 X 1" PANCAKE HEAD (EACH PURLIN)
TOP VIEW
**
INSIDE CLOSURE
1/4-14 X 7/8" (12" C.C.) GABLE EXTENSION CHANNEL (GEC)
#12-14 X 1 1/4" (6" C.C. for CS PANEL) (12" C.C. for AP PANEL) 1/4-14 X 7/8" (12" C.C.) PANEL CAP TRIM (SCT) RAKE ANGLE (A-20-B) FIELD NOTCH AS REQUIRED AT EACH PURLIN ROW
NOTE: · Purlin closure is to be field cut between eave struts and purlins. · Closure clips may need to be field cut to fit in purlin and staggered so #12-14 X 1 1/4" fasteners don't interfere.
PURLIN
(2) 1/8" X 3/8" BLIND RIVETS TO CONNECT EACH CLIP TO EACH PURLIN CLOSURE
EXTENSION FLASHING (EF) #12-14 X 1" PANCAKE HEAD EACH PURLIN #12-14 X 1 1/4" (12" C.C.)
EAVE STRUT
WALL PANEL
(2) #12-14 X 1 1/4" (2) 1/8" X 3/8" BLIND RIVETS PURLIN CLOSURE CLIPS (GCC1)
** DRAFTING NOTE: Inside closure must be provided on buildings with Liner Insulation System.
PURLIN CLOSURE INSTALLATION
Made with FlippingBook flipbook maker