Eave and Gable Extensions

Eave Ext Horiz Soff Low Gable Ext - FSP Soffit Inset Gable and SS Roof High Pitch

Refer to gable sections for roof panel and gable trim attachments at the building gable. Provide air gap of 1/4" min. at bottom of panel to avoid corrosion.

*** DRAFTING NOTE: INSIDE CLOSURE MUST BE PROVIDED ON BUILDINGS WITH LINER INSULATION SYSTEM.

CUT THIS SECTION AT END OF EXTENSION

* STC/MSC ROOF: (2) #12-14 X 1 1/4" (WALL COLOR) (TYP.) MVF/MVP ROOF: (2) #12-14 X 1 1/4" (WALL COLOR) (TYP.)

SPECIAL CHANNEL (PL- ) XLGA-1 CLIP

SPECIAL CHANNEL (PL- )

BL

INSIDE CLOSURE

#12-14 X 1 1/4" PANCAKE HEAD (24" C.C.) (2) #12-14 X 1 1/4" PANCAKE HEAD

INTERMEDIATE PURLIN EAVE EXTENSION BEAM #12-14 X 1" PANCAKE HEAD

***

BL

#12-14 X 1 1/4" (TYP) (6" C.C. for CS PANEL) (12" C.C. for CS PANEL)

EAVE EXTENSION PURLIN (FIELD NOTCH FOR SPECIAL CHANNEL) (2) #12-14 X 1 1/4" (WALL COLOR)

EAVE EXTENSION END PANEL

**DRAFTING: INSIDE CLOSURE NOT REQ'D IF WALLS ARE "CS INSULATED"

#12-14 X 1" PANCAKE HEAD (24" C.C.)

SOFFIT RAKE ANGLE (A-20-H)

** INSIDE CLOSURE

(2) #12-14 X 1" PANCAKE HEAD

XXX' - X"

1

4 "

XBC-33 (4) 1/2" X 1 1/4" BOLTS EAVE EXTENSION BEAM

SOFFIT TRIM (VPST)

SOFFIT PURLIN (2) #12-14 X 1 1/4"

PANEL SUPPORT (SSSP)

1/8" X 3/8" BLIND RIVET (12" C.C.)

FSP SOFFIT PANEL GIRT ANGLE (XGA- )

SOFFIT RAKE ANGLE (A-20-H) #12-14 X 1" PANCAKE HEAD

NOTE: * PRE-DRILL TOP AND BOTTOM FLANGE OF EXTENSION BEAM FOR FASTENERS

#12-14 X 1" PANCAKE HEAD (12" C.C.) (TYP.)