MVF / MVP - Erection Manual

MVF/MVP M echanically S eamed V ertical Leg F lat M echanically S eamed V ertical Leg P encil-rib

®

ERECTION SEQUENCE

STEP 4 cont'd

INSULATION

1

ROOF PANEL

FIRST PANEL Attach the panel to the eave strut with 1/4"- 14 x 1-1/4" WT fasteners. Four fasteners are required at this location.

TRIM CAP

DOUBLE BEAD TAPE MASTIC

EAVE STRUT

1/4"-14 X 1 1/4" WT 1

3

4

2

Installing fasteners in proper sequence is important as it helps maintain panel modularity.

FASTENER SEQUENCE EAVE

CAUTION Do not, under any circumstance, step on the panel at the seam or at the panel ends until the adjacent side, end panels or eave fasteners are fully attached. The roof panel may not support the weight of a person at these locations and could affect panel modularity. CAUTION The roof should be swept clean of any drill shavings at the end of each day to prevent rust.

Version 2.0

SUBJECT TO CHANGE WITHOUT NOTICE

MVF/MVP-25