MVF / MVP - Erection Manual

MVF/MVP M echanically S eamed V ertical Leg F lat M echanically S eamed V ertical Leg P encil-rib

®

ERECTION SEQUENCE

STEP 13

1/4"-5/16" BEAD OF SIKA-511 IN LINE WITH DOUBLE BEAD TAPE MASTIC "PIG-TAIL" FROM STEP 8

3/4"

DOUBLE BEAD TAPE MASTIC

OUTSIDE-RIDGE CLOSURE

NOTE: ROOF PANELS MUST BE SEAMED BEFORE CONTINUING WITH STEP 13. After all panel runs are installed and seamed, return to first panel run at the ridge. Apply Sikalastomer-511 into the two corners of the roof panel where the Double Bead Tape Mastic will cross. Place a continuous run of Double Bead Tape Mastic located as shown. The edge of the mastic is to run next to the notch in the panel.

"PIG-TAIL" FROM STEP 8

Marry the Double Bead Tape Mastic into the "Pig-tail" piece of mastic that was applied in Step 8.

DOUBLE BEAD TAPE MASTIC

SIKA-511 SEALANT UNDER DOUBLE BEAD TAPE MASTIC

DOUBLE BEAD TAPE MASTIC

ROOF PANEL

CAUTION Forcing the tape mastic back into the corners will lessen the thickness of the tape mastic where it is needed most.

SIKA-511 SEALANT

RIGHT WAY

WRONG WAY

Sikalastomer-511 in Corners

MVF/MVP-36

Version 2.0

SUBJECT TO CHANGE WITHOUT NOTICE